Nautic Industry Sector

Thanks to its patent, dust extraction is total, it releases a smooth surface that has already been sucked in and eliminates dust in the air.

Contains dust in paint materials when applied.

Even with abrasives not aligned on the holes, it holds exceptional suction.

With Skeletime the abrasive is totally used and not wasted. With the same abrasive grain, it releases a more finished surface with the advantage of less use of paint materials.

Thanks to its patent, the abrasive execution speed is total and the working phase is much faster.

Furthermore, Skeletime, adapting to the shapes of the surfaces, replaces many manual processes

Thanks to its Skeletime patent, it increases the abrasive power at the same granulometry, flattens any slight welding overlays with combined abrasive and releases minor surface incisions.

Skeletime, with the same abrasive grain, attacks and rectifies work on epoxy fillers, metal fillers, polyester fillers applied on every support of the Boat in a faster and more effective way.

The Skeletime patent also helps to eliminate unwanted surface undulations of flat or curvilinear parts and eliminates manual work.

Finer and perfectly homogeneous sanding.

Perfectly recreates the corners and edges of surface shapes.

Thanks to its patent, it quickly flattens the orange peel of these materials, including the raw Gealcoat, a very dark and hard material.

With Skeletime the surface smoothing occurs without undesirable undulations on all parts of the boat with intact corners and profiles.

Thanks to his patent, the surface roughness released is more homogeneous and fine, tool-proof.

Sanding with Skeletime is perfectly homogeneous on every surface of the boat: flattened to a mirror finish and with paint on the perfectly leveled edges, but without peeling.

Polishing is much faster, less overheated and less prone to the possible return of unwanted scratches.

Thanks to its patent, it perfectly eliminates the clear varnish step, with the obvious advantages already listed in the varnish review for orange peel removal.

During this phase the sanding is without surface undulations, homogeneous and without flattening or sanding steps.

During this coupling of materials and during sanding, their steps are perfectly flattened and zeroed on all surface shapes.

Thanks to its patent, during the sanding phase of the transparent bottom it does not peel the lateral coloring of the edges, with consequent time and perfect work performed.